Food Pump

Configuration

  • Close coupled
  • Bare shaft

Geometry

  • Standard Pitch
  • Extended Pitch
Single Stage Pump

Capacities 86 m3/hr
Pressures upto 24 bar

These Heavy Duty semi-hygienic pumps are specifically designed for Wine & beverage transfer applications and can also be used for other Food & Beverages applications. Standard connections include IDF, SMS & RJT.

Multi Stage Pump

Capacities 86 m3/hr
Pressures upto 24 bar

These Heavy Duty semi-hygienic pumps are specifically designed for Wine & beverage transfer applications and can also be used for other Food & Beverages applications. Standard connections include IDF, SMS & RJT.

FS Series Pump

Capacities 86 m3/hr
Pressures upto 24 bar

“S” range pumps have been recenyly developed to meet demanding requirements of 3A sanitry standards. These pumps have smooth contour to avoid any product retaining pockets and are designed to facilitate easy conversion from bare shaft to close coupled pumps at site. The material of construction is par FDA standards. Depending on the application with or without the feed scerw options are available in single and double mechanical seals and fitted confirming to food standards. Standard connections include IDF, SMS, RJT, CIP port is optional.

WETTABLE HOUSING COMPONENTS:
• Fabricated Stainless Steel.

STATOR:
• Nitrile Black • Nitrile White • EPDM Black • EPDM White • Fluoroelastomer.

ROTOR:
• Stainless Steel.

COUPLING ROD:
• Stainless Steel.

SHAFT:
• Stainless Steel.

OTHER EXOTIC MATERIALS:
• Duplex • Super Duplex • Alloy 20 • Haste alloy.

Dry Running Protection Device:

To prevent the stator damage due to dry running, specially developed temperature sensor is screwed into the stator wall to monitor the operating temperature. If by any chance the pump runs dry, the stator temperature would increase. Roto DRP would switch off the pump at pre set temperature.

Pressure Switch:

To prevent the pump from damage due to over pressurization in the discharge as well as low pressures beyond the capability of the pump. This system trips the pump and protects the pump as well as the system.

Gauges (Pressure, Vacuum, and Differential):

These devices are especially important for the system with dynamic working characteristics, that require constant monitoring. The selection of gauge requires consideration of process, environment, accuracy, dial size, connection & mounting. It is advised to limit the normal working pressure to 25-75% of the scale of the gauge.

Relief Valves:

In addition to relieving excess pressure from closed-top vessels or piping systems, these normally closed valves provide system control benefits. It is versatile and widely utilized valve. Its compact size, ease of setting, readjustment and repeatability, all contribute to its popularity. The pressure setting is done manually.

Strainers:

A Strainer is an inexpensive “insurance” for protecting pumps. There is often unwanted matter present which can cause serious problems. Dust, foreign matter, or even clumps of product itself, can clog or damage critical & expensive equipment. Another factor to consider is the cost of downtime.

ROTO SEAL CODE ‘N’

MEDIA PROPERTIES: Containing solids or with high viscosites Exp- Sugar, Paper and Waste water Industry.
APPLICATIONS: Oil, sewage water, clean water, corrosive applications, oil water separation, food applications.
DESCRIPTION: Single acting, unbalance, bidirectional, wave spring.
PRESSURE RANGE: Up to 362 Psi.

ROTO SEAL CODE ‘P’

MEDIA PROPERTIES: Containing solids or with high viscosites Exp- Sugar, Paper and Waste water Industry.
APPLICATIONS: Oil, sewage water, clean water, corrosive applications, oil water separation, food applications.
DESCRIPTION: Single acting, unbalance, bidirectional, wave spring.
PRESSURE RANGE: Up to 362 Psi.

ROTO SEAL CODE ‘R’

MEDIA PROPERTIES: Containing solids or with high viscosites Exp- Sugar, Paper and Waste water Industry.
APPLICATIONS: Oil, sewage water, clean water, corrosive applications, oil water separation, food applications.
DESCRIPTION: Single acting, unbalance, bidirectional, multiple spring.
PRESSURE RANGE: Up to 362 Psi.

ROTO SEAL CODE ‘S’

MEDIA PROPERTIES: Containing solids or with high viscosites Exp- Sugar, Paper and Waste water Industry.
APPLICATIONS: Oil, sewage water, clean water, corrosive applications, oil water separation, food applications.
DESCRIPTION: Single acting, unbalance, bidirectional, multiple spring.
PRESSURE RANGE: Up to 362 Psi.

ROTO SEAL CODE ‘T’

MEDIA PROPERTIES: Low to high viscosity,with or without solids,abrasive, adhesives,crystallizing, aggressive, toxic media.
APPLICATIONS: Toxic media, food , pharma, sewage, ceramic slurries.
DESCRIPTION: Double acting,multiple spring, unbalanced,bidirectional.
PRESSURE RANGE: Up to 362 Psi.

+ About product

Configuration

  • Close coupled
  • Bare shaft

Geometry

  • Standard Pitch
  • Extended Pitch
Single Stage Pump

Capacities 86 m3/hr
Pressures upto 24 bar

These Heavy Duty semi-hygienic pumps are specifically designed for Wine & beverage transfer applications and can also be used for other Food & Beverages applications. Standard connections include IDF, SMS & RJT.

Multi Stage Pump

Capacities 86 m3/hr
Pressures upto 24 bar

These Heavy Duty semi-hygienic pumps are specifically designed for Wine & beverage transfer applications and can also be used for other Food & Beverages applications. Standard connections include IDF, SMS & RJT.

FS Series Pump

Capacities 86 m3/hr
Pressures upto 24 bar

“S” range pumps have been recenyly developed to meet demanding requirements of 3A sanitry standards. These pumps have smooth contour to avoid any product retaining pockets and are designed to facilitate easy conversion from bare shaft to close coupled pumps at site. The material of construction is par FDA standards. Depending on the application with or without the feed scerw options are available in single and double mechanical seals and fitted confirming to food standards. Standard connections include IDF, SMS, RJT, CIP port is optional.

+ Material Options

WETTABLE HOUSING COMPONENTS:
• Fabricated Stainless Steel.

STATOR:
• Nitrile Black • Nitrile White • EPDM Black • EPDM White • Fluoroelastomer.

ROTOR:
• Stainless Steel.

COUPLING ROD:
• Stainless Steel.

SHAFT:
• Stainless Steel.

OTHER EXOTIC MATERIALS:
• Duplex • Super Duplex • Alloy 20 • Haste alloy.

+ Accessories

Dry Running Protection Device:

To prevent the stator damage due to dry running, specially developed temperature sensor is screwed into the stator wall to monitor the operating temperature. If by any chance the pump runs dry, the stator temperature would increase. Roto DRP would switch off the pump at pre set temperature.

Pressure Switch:

To prevent the pump from damage due to over pressurization in the discharge as well as low pressures beyond the capability of the pump. This system trips the pump and protects the pump as well as the system.

Gauges (Pressure, Vacuum, and Differential):

These devices are especially important for the system with dynamic working characteristics, that require constant monitoring. The selection of gauge requires consideration of process, environment, accuracy, dial size, connection & mounting. It is advised to limit the normal working pressure to 25-75% of the scale of the gauge.

Relief Valves:

In addition to relieving excess pressure from closed-top vessels or piping systems, these normally closed valves provide system control benefits. It is versatile and widely utilized valve. Its compact size, ease of setting, readjustment and repeatability, all contribute to its popularity. The pressure setting is done manually.

Strainers:

A Strainer is an inexpensive “insurance” for protecting pumps. There is often unwanted matter present which can cause serious problems. Dust, foreign matter, or even clumps of product itself, can clog or damage critical & expensive equipment. Another factor to consider is the cost of downtime.

+ Sealing Options

ROTO SEAL CODE ‘N’

MEDIA PROPERTIES: Containing solids or with high viscosites Exp- Sugar, Paper and Waste water Industry.
APPLICATIONS: Oil, sewage water, clean water, corrosive applications, oil water separation, food applications.
DESCRIPTION: Single acting, unbalance, bidirectional, wave spring.
PRESSURE RANGE: Up to 362 Psi.

ROTO SEAL CODE ‘P’

MEDIA PROPERTIES: Containing solids or with high viscosites Exp- Sugar, Paper and Waste water Industry.
APPLICATIONS: Oil, sewage water, clean water, corrosive applications, oil water separation, food applications.
DESCRIPTION: Single acting, unbalance, bidirectional, wave spring.
PRESSURE RANGE: Up to 362 Psi.

ROTO SEAL CODE ‘R’

MEDIA PROPERTIES: Containing solids or with high viscosites Exp- Sugar, Paper and Waste water Industry.
APPLICATIONS: Oil, sewage water, clean water, corrosive applications, oil water separation, food applications.
DESCRIPTION: Single acting, unbalance, bidirectional, multiple spring.
PRESSURE RANGE: Up to 362 Psi.

ROTO SEAL CODE ‘S’

MEDIA PROPERTIES: Containing solids or with high viscosites Exp- Sugar, Paper and Waste water Industry.
APPLICATIONS: Oil, sewage water, clean water, corrosive applications, oil water separation, food applications.
DESCRIPTION: Single acting, unbalance, bidirectional, multiple spring.
PRESSURE RANGE: Up to 362 Psi.

ROTO SEAL CODE ‘T’

MEDIA PROPERTIES: Low to high viscosity,with or without solids,abrasive, adhesives,crystallizing, aggressive, toxic media.
APPLICATIONS: Toxic media, food , pharma, sewage, ceramic slurries.
DESCRIPTION: Double acting,multiple spring, unbalanced,bidirectional.
PRESSURE RANGE: Up to 362 Psi.

+ Industries
+ Installations

Post Enquiry

Share
Hide Buttons